By this method of extraction, speed and efficiency is obtained, saving hours of labor. You could have a substantially greater number of valves ready for repacking during a single outage or downtime. This machine can also be used to remove emergency repair sealant from valves and restore them to like-new condition. 

Savings can be enormous and packing extractions up to 50 valves per day are not unusual

DESCRIPTION

MODEL HPZ-95NA

The model HPZ-95NA water, jet packing extraction, system consists of an air operated, high pressure pumping system, high pressure hose, extraction gun, portable reservoir, and nozzle kit. This system has been designed for fast and efficient removal of valve stem packing, pump packing and flange gasketing. It also eliminates the risk of scoring or gouging a valve stem, stuffing box bore, or flange face cause by out-dated manual extraction methods. The HPZ-95NA system allows for instantaneous flow control at the gun without the use of any electrical or pneumatic remote controls or switches. The DSG-20 Extraction gun is a hand held device that is activated by depressing a gun type trigger. This allows for a safe and positive flow shut-off control at the gun.  Releasing the gun trigger stops all jetting flow instantaneously, regardless of the distance from the pumping  unit. When the trigger is  released, the pump unit will  stall at the preset operating  pressure. The HPZ-95NA provides the operator with  the ultimate in safety and  positive control of the  amount of water or chemical used in the extraction process.

FEATURES

• All controls located on control panel, behind lockable ventilated door.
• Discharge pressure to 20,000 PSIG-(138MPa)(1400BAR)
• No electrical components for safe, non sparking operation.
• Operates using plant water via hose or non pressurized portable reservoir.
• Stainless steel console, corrosion resistant, with rear panel removal, drawer like entry with no  piping to disconnect.
• Sample case size, light weight, for operating in tight spaces and elevated areas.
• Reduce labor cost/1man operation
• Plant air operated system
• High pressure relief valve
• Water inlet filter, auto drain air filter.

DATA

• Size: 11"High x 20" wide x 17" deep  (28cm x 51cm x 43cm)
• Weight: 87 pounds(40kg)
• Air Requirements: 70 to 100psi @ 50cfm
• Gun: 20,000 PSI-WP
• Hose: 26,000 PSI-WP, 60,000 PSI
• Burst, 1\2" O.P.

Hydro Technology Systems, Inc
Post Office Box 910
Harvey, LA 70059
(Within USA) 1-866-347-6277 or 504-347-6277
Fax: 504-347-5548
Email: hydrotech@earthlink.net